iscsictl —
program to manage iSCSI instances
iscsictl |
[ -d
sockdir
]
command
[arguments
... ] |
The
iscsictl utility manages iSCSI instances
on the local computer. It talks to the
iscsid(8)
program to perform this management.
iSCSI is a method for transferring SCSI commands across a TCP connection. The
client which issues the SCSI command is called the initiator, and the device
which receives the command and takes action is called the target; this mirrors
SCSI devices, although instead of being physically attached to a host, the
SCSI commands and responses take place over a network. iSCSI communication is
done in sessions. The iSCSI initiator logs in to a target across the network,
possibly authenticating itself; this creates an iSCSI
session between initiator and target. The
initiator can then issue commands to and read responses from the target.
Firstly, the iSCSI initiator on the local machine must be made aware of the
network location of the target. The
add_send_target is used in
iscsictl to do this. The targets can be
listed using the
list_targets command. To
login from the initiator to the target, the
login command is used; this creates a
session between the initiator and target. The sessions can be listed by using
the
list_sessions command.
-
-
-d
sockdir- Specify the directory where the socket for
iscsid(8)
lives.
The target address specification for the
add_target and
add_send_target commands may include a
target name, target address (IP or FQDN), TCP port, and group tag. Either the
target address or target name is required. (For add_send_target, a target
address is required). The address, port, and group tag may optionally be
repeated.
-
-
-a
target-address- Specify the target address by IP or FQDN.
-
-
-n
target-name- Specify the target by name.
-
-
-p
port-num- The TCP port to connect to the target on. (Default port is 3260)
-
-
-g
group-tag- The group tag, a 16-bit integer.
The portal address specification for the
add_portal command may include an address
(IP or FQDN), port, and group tag, plus portal options.
-
-
-a
target-address- Specify the target address by IP or FQDN.
-
-
-p
port-num- The TCP port to connect to the target on. (Default port is 3260)
-
-
-g
group-tag- The group tag, a 16-bit integer.
-
-
-h- Use a CRC32 header digest.
-
-
-d- Use a CRC32 data digest.
-
-
-l
segment-length- Specify the max received data segment length.
Target options are as follows:
-
-
-h- Use a CRC32 header digest.
-
-
-d- Use a CRC32 data digest.
-
-
-w
time- Time to wait.
-
-
-r
time- Time to retain.
-
-
-e
level- Error recovery level.
-
-
-l
segment-length- Specify the max received data segment length.
Authentication options are as follows:
-
-
-t
type- Specify authentication type. n indicates
no authentication, while c indicates CHAP
authentication, and C indicates Mutual
CHAP authentication.
-
-
-u
name- User name.
-
-
-s
secret- Initiator secret.
-
-
-S
secret- Target secret.
Commands
The
iscsictl command argument is taken from
one of the following options:
-
-
version- return version information from the
iscsictl utility and the
iscsid(8)
daemon.
-
-
add_target
target-address-spec
[target-opts
]
[auth-opts
]
[-N
symbolic-name
]- A target-address-spec may include name,
address, port, and group tag, with address/port/tag possibly
repeated.
-
-
add_portal
portal-address-spec
[-I
-target-id
]
[-N
-symbolic-name
]- Add a portal to the list of portals.
-
-
remove_target
-I
target-id-
remove_target
-n
target-name- Remove a target by name or ID.
-
-
slp_find_targets- Not implemented.
-
-
refresh_targets
[-I
target-id
]- this command causes the iSCSI initiator to refresh its view of the iSCSI
targets to which it is connected. If this command completes successfully,
an “OK” value is printed. For more context on the exact
usage of this command, please see the example below.
-
-
list_targets- Display a list of targets the iSCSI initiator knows about.
-
-
add_send_target
-a
target-address
[target-address-spec
]
[target-opts
]
[auth-opts
]
[-N
symbolic-name
]- this command allows the iSCSI initiator to connect to an iSCSI target. The
subsequent
-a target provides the
address of the target. This can be provided as a numerical IP address, or
as a textual FQDN. For more context on the exact usage of this command,
please see the example below.
-
-
remove_send_target
-I
target-id-
remove_send_target
-n
target-name- Remove a send target from the list by name or
target-id
-
-
list_send_targets- Display the list of send targets configured.
-
-
add_isns_server
iSNS-address-spec- Add an iSNS server using an address specification that may include name,
address, and port.
-
-
remove_isns_server
-I
isns-server-id-
remove_isns_server
-a
isns-server-address-
find_isns_servers- Not Implemented.
-
-
list_isns_servers-
refresh_isns
[-I
id
]-
login
[-m
]
[target-opts
]
[auth-opts
]
[-P
portal-id
]- To be able to communicate with the iSCSI target, the initiator must login.
This command allows this login to take place. The subsequent
-P
session argument provides the session
which should be used to perform the login. On successful completion of
this command, the session which has been created will be displayed, along
with the connection number. For more context on the exact usage of this
command, please see the example below.
-
-
logout
[-I
session-id
]-
add_connection
[-m
]
[target-opts
]
[auth-opts
]
[-P
portal-id
]-
remove_connection
-I
session-id
-C
connection-id-
inquiry
[-l
lun
]
[-d
detail
]
[-p
pag
]-
read_capacity
[]-
report_luns
[-I
session-id
]-
test_unit_ready
[-I
session-id
]-
add_initiator
-a
interface-address
[-N
symbolic-name
]-
remove_initiator
-I
portal-id-
list_initiators-
list_sessions
[-c
]- Once login to the target has taken place, a session will have been
created. To list the session information, this command is used. The
session number and target information for each of the targets are
displayed. If the
-c flag is used,
connection information is displayed as well. For more context on the exact
usage of this command, please see the example below.
-
-
set_node_name
-n
initiator-name
[-A
-alias
]
[-i
isid
]- Set the initiator name. The default initiator name is
iqn.1994-04.org.netbsd:iscsi.<hostname>:<hostid> . An
alias can be specified as well as an
isid
iscsictl is intended to be used as follows:
The initiator itself can be loaded as a kernel module, and works successfully on
5.0 (the host called "burner"), running against the
NetBSD target on a 5.99 host.
burner# modload iscsi
burner# modstat iscsi
NAME CLASS SOURCE REFS ADDRESS SIZE REQUIRES
iscsi driver filesys 0 ffffffff813c6000 44208 -
burner# iscsid
iSCSI Daemon loaded
burner# iscsictl add_send_target -a 172.16.135.133
Added Send Target 1
burner# iscsictl refresh_targets
OK
burner# iscsictl list_targets
1: iqn.1994-04.org.netbsd.iscsi-target:target0
2: 172.16.135.133:3260,1
burner# iscsictl login -P 2
Created Session 2, Connection 1
burner# iscsictl list_sessions
Session 2: Target iqn.1994-04.org.netbsd.iscsi-target:target0
burner# newfs /dev/rsd0a
/dev/rsd0a: 100.0MB (204800 sectors) block size 8192, fragment size 1024
using 4 cylinder groups of 25.00MB, 3200 blks, 6144 inodes.
super-block backups (for fsck -b #) at:
32, 51232, 102432, 153632,
burner# mount /dev/sd0a /mnt
burner# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/wd0a 4066094 186994 3675795 4% /
kernfs 1 1 0 100% /kern
/dev/sd0a 99247 1 94283 0% /mnt
burner# dmesg | egrep '(scsibus|sd0)'
scsibus0 at bha2: 16 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
scsibus1 at iscsi0: 1 target, 16 luns per target
sd0 at scsibus1 target 0 lun 0: <NetBSD, NetBSD iSCSI, 0> disk fixed
sd0: fabricating a geometry
sd0: 100 MB, 100 cyl, 64 head, 32 sec, 512 bytes/sect x 204800 sectors
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
burner#
and, on the target end of the iSCSI session:
Reading configuration from `/etc/iscsi/targets'
target0:rw:0.0.0.0/0
extent0:/tmp/iscsi-target0:0:104857600
DISK: 1 logical unit (204800 blocks, 512 bytes/block), type iscsi fs
DISK: LUN 0: 100 MB disk storage for "target0"
TARGET: iSCSI Qualified Name (IQN) is iqn.1994-04.org.netbsd.iscsi-target
> iSCSI Discovery login successful from iqn.1994-04.org.netbsd:iscsi.burner.cupertino.alistaircrooks.com:0 on 172.16.135.137 disk -1, ISID 70368764559360, TSIH 1
< iSCSI Discovery logout successful from iqn.1994-04.org.netbsd:iscsi.burner.cupertino.alistaircrooks.com:0 on 172.16.135.137 disk -1, ISID 70368764559360, TSIH 1
> iSCSI Normal login successful from iqn.1994-04.org.netbsd:iscsi.burner.cupertino.alistaircrooks.com:0 on 172.16.135.137 disk 0, ISID 70368764559360, TSIH 2
iscsid(8)
The
iscsictl utility appeared in
NetBSD 6.0.
Alistair Crooks
<
agc@NetBSD.org>
wrote this manual page. The
iscsictl
utility was contributed by Wasabi Systems, Inc.